Beijing Topsky Century Holding Co.,Ltd
Mission:To let the world more safer. Technical route:To solve the problem of traditional security with non-traditional technology. Customer groups:Public security and production safety
Add to Cart
| Flame-retardant performance of the outer layer: The damaged length ≤ 100mm, and the afterflame time ≤ 4s. Tensile strength performance of the outer layer: The warp direction ≥ 6200N, and the weft direction ≥ 3700N. Tearing strength performance of the outer layer: The warp direction ≥ 3.3×10²N, and the weft direction ≥ 3.1×10²N. Thermal stability performance of the outer layer: After the thermal stability performance test, the dimensional change rate in both warp and weft directions ≤ 1%, and there are no phenomena such as discoloration, carbonization, melting and dripping of the sample. Hydrostatic pressure resistance performance: ≥ 18.0KPa (no water droplets seep out). Dexterity performance of heat-insulating gloves: Not lower than the level 3 requirements specified in GA7-2004. The diameter of the smallest test rod picked up under the test conditions is 6.5mm. Performance level is 4. High-temperature resistance performance of the heat-insulating hood: After being exposed to a high temperature of 180°C for 5 minutes, there are no phenomena such as carbonization, melting and dripping of the heat-insulating hood. Flame-retardant performance of the heat-insulating layer: The damaged length in both warp and weft directions ≤ 100mm, the afterflame time ≤ 2 seconds, and there are no phenomena of melting and dripping. Thermal stability performance of the heat-insulating layer: The dimensional change rate in both warp and weft directions ≤ 1%, and there are no phenomena such as discoloration, carbonization, melting and dripping of the sample. Flame-retardant performance of the comfort layer: The damaged length in the warp direction ≤ 92mm, the damaged length in the weft direction ≤ 76mm, and the afterflame time in both warp and weft directions ≤ 2s. Tensile strength of the comfort layer: The warp direction ≥ 340N, and the weft direction ≥ 300N. High-temperature resistance performance of the sewing thread: After the sewing thread is exposed to a high temperature of 260°C for 5 minutes, there are no phenomena such as carbonization, melting and dripping. High-temperature resistance performance of the rigid accessories: After the rigid accessories are exposed to a high temperature of 260°C for 5 minutes, they can maintain their original functions. Overall flame and radiant heat protection performance: TPP = 45.3 Overall seam tensile strength: ≥ 890N Overall stitch density: For plain and topstitch: 9 stitches/3cm. For overlock stitch: 9 stitches/3cm. Quality (overall performance): ≤ 5411g. |
Beijing Topsky Intelligent equipment Group Co.,Ltd.. (stock code: 836307) was founded in 2003, committed to making the world safer with innovative equipment, and determined to become a continuous leader in global high-end safety equipment.
Our company has independent R&D and technology promotion capabilities, and has one R&D and production building. Headquartered in Jinqiao Industrial Base, Zhongguancun High-tech Park, it is a national high-tech enterprise with a registered capital of RMB 46,514,300. Our company has independent R&D and manufacturing capabilities. Located in Beijing Economic Development Zone, the 3-story R&D building covers an area of 1,500 square meters, the production building is 1,800 square meters, and the third-phase production building is nearly 3,000 square meters under construction.
Our innovative technologies, services and systems are dedicated to serving the firefighting, law enforcement agencies, safety supervision bureaus, coal mines, petrochemicals,. It involves the research and development of high-end equipment such as drones, robots, unmanned ships, special equipment, emergency rescue equipment, law enforcement equipment, and coal mine equipment.
So far, many products have been exported to more than 10 countries.
1 Q:Do you have any discount?
A:Yes, if you buy large QTY, please send us a email, we will give you a big discount.
2 Q:What's the delivery time?
A:According to the specification and quantity of your order, generally 10-15 days for normal
standard products within 50pcs.
3 Q:Do you have overseas distributor?
A:Yes,we have distributors in Korea, Singapore, Malaysia, UK, Iran, India and so on.
4 Q:Can we use our logo on the products?
A:Yes.We can provide OEM and sign a licensing agreement.
5 Q:Are you manufacturer or trading company?
A:We are manufacturer with 18 years of experience.Welcome to visit our company.
6 Q:What's the means of transport?
A:Express such as TNT,Fedex,DHL,UPS, or logistics by indicator.
7: Why we should choose your company?
We have many years of industry production and management experience, professional R & D, sales, after-sales team. It can
perfectly solve all the problems that customers encounter from purchase to sale.
8: How to cooperate with you?
You only need to contact our business representative, and they will be patient to guide you through the whole process
9: What's your payment way?
T/T by our bank account directly.
Please contact us